| | IC200MDL742 | IC200MDL743 | IC200MDL744 |
| Product Name | VersaMax Discrete Output Module,
24 VDC Positive Logic 0 .5A with
ESCP, 32 points | VersaMax Discrete Output Module,
5/12/24 VDC Negative Logic, 0 .5 A per
point (1 group of 16) 16 points | VersaMax Discrete Output Module,
5/12/24 VDC Negative Logic, 0 .5 A per
point (2 groups of 16) 32 points |
| Lifecycle Status | Active | Active | Active |
| Output Voltage | 18-30 VDC, 24 VDC nominal | 5/12/24 VDC | 5/12/24 VDC |
| Number of Points | 32 | 16 (1 group of 16) | 32 (2 groups of 16) |
| Channel to Channel Isolation | No | No | No |
| Load Current per Point | 0 .5 A per point | 0 .5 A per point | 0 .5 A per point |
Input and Output Response
Time- On/Off (ms) | 0 .5/0 .5 | 0 .2/1 .0 | 0 .2/1 .0 |
| Protection | Short circuit protection, overcurrent
protection, free-wheeling diodes
(each output) | No internal fuse | No internal fuse |
| Points per Common | 2 groups of 16 | 1 group of 16 | 2 groups of 16 |
| External Power Supply | 18-30 VDC, 24 VDC nominal | 4 .75 to 5 .25 VDC, 5 VDC nominal
for 5 VDC-TTL mode; 10 .2 to 30 VDC,
12/24 VDC nominal for 12/24 VDC mode | 4 .75 to 5 .25 VDC, 5 VDC nominal
for 5 VDC-TTL mode; 10 .2 to 30 VDC,
12/24 VDC nominal for 12/24 VDC mode |
| Load Current | 0 .5 A at 30 VDC maximum (resistive);
2 .0 A inrush maximum for 100 ms | 25 mA maximum for 5 VDC-TTL mode,
0 .5 A at 30 VDC maximum,
2 .0 A inrush maximum for 100 ms
for 12/24 VDC mode | 25 mA maximum for 5 VDC-TTL mode,
0 .5 A at 30 VDC maximum,
2 .0 A inrush maximum for 100 ms
for 12/24 VDC mode |
5V Backplane Current
Consumption (mA) | 150 maximum | 70 maximum | 140 maximum |
| LED Indicators | One LED per point shows individual
point ON/OFF state (logic side) .
FLD PWR LED indicates field power is
present . OK LED indicates backplane
power is present . | One LED per point shows individual
point ON/OFF state (logic side) .
FLD PWR LED indicates field power is
present . OK LED indicates backplane
power is present . | One LED per point shows individual
point ON/OFF state (logic side) .
FLD PWR LED indicates field power is
present . OK LED indicates backplane
power is present . |
| Dimensions (W x H x D) | 110 mm (4 .3 in) x 66 .8 mm (2 .63 in) x
50 mm (1 .956 in), not including the
height of the carrier or the
mating connectors | 110 mm (4 .3 in) x 66 .8 mm (2 .63 in) x
50 mm (1 .956 in), not including the
height of the carrier or the
mating connectors | 110 mm (4 .3 in) x 66 .8 mm (2 .63 in) x
50 mm (1 .956 in), not including the
height of the carrier or the
mating connectors |
